| Today | Tomorrow | Tuesday |
|---|---|---|
Scattered clouds
65°/49°
|
Broken clouds
72°/59°
|
Scattered clouds
81°/49°
|
Alert
Alerts
Flushing the end of the line valves
January 03, 2026
We are flushing the end of the line flush valves today. If you notice cloudy or discolored water please run your outside faucet for 5 to 10 minutes or unclear clear.
FLUSHING YOUR WATER LINE
In Texas, flushing regulations for water distribution systems are governed by both federal and state regulations to ensure the safety and quality of
drinking water. These regulations are outlined by the Texas Commission on Environmental Quality (TCEQ), which oversees public water systems in the
state. The Texas Commission on Environmental Quality (TCEQ) mandates that public water systems (PWSs) inform and educate the public about
certain activities or processes that may affect customers, particularly when these activities have the potential to impact public health or water quality.
Public Notification Requirements
Under TCEQ regulations, PWSs are required to provide public notification in specific circumstances, such as:
• Boil Water Notices: If the water supply is contaminated or its safety is compromised, PWSs must issue a boil water notice to inform
customers to boil water before consumption.
• Violation of Drinking Water Standards: When a PWS violates maximum contaminant levels (MCLs) or treatment techniques, it must notify
customers of the violation, potential health effects, and corrective actions being taken.
• Other Situations: Any other situations that pose a risk to public health, as determined by TCEQ, require timely notification to customers.
These requirements are detailed in TCEQ's publication "Rules and Regulations for Public Water Systems" (RG-195), which outlines the circumstances
under which public notification is mandatory and provides guidance on the content and delivery methods for such notices.
Why flush? Flushing helps to:
• Remove any debris or sediment introduced during the repair.
• Ensure the water is safe for drinking and cooking.
• Prevent water discoloration caused by sediment.
• Remove any air pockets in the pipes.
Follow these simple steps to flush your pipes and relieve trapped air.
Flushing water lines is generally more effective and efficient when done through exterior faucets, particularly the hose bibs, rather than
interior taps. This is because exterior faucets are typically closer to the point where the water enters the home, allowing for a faster and
more thorough flush of the water lines. Run the water for at least 5 minutes or until the water runs clear.
Here's why flushing through exterior faucets is preferred:
• Closer to the main supply: Exterior faucets are usually located closer to the water supply line, meaning less water needs
to be flushed to clear the lines.
• No aerators: Exterior faucets lack aerators, which can get clogged by sediment during flushing.
• No temperature issues: Flushing through exterior faucets, which are typically cold-water taps, avoids potentially getting
sediment into the hot water tank.
• No need to worry about water pressure: Flushing through exterior faucets allows you to open them fully without worrying
about water pressure issues in the house.
While you can still flush interior faucets, it's generally recommended to start with the exterior ones to clear the main lines. You can then
run the interior taps to ensure the water is clear throughout the house.
If discolored water persists after running the water for 15 minutes, please report this to LTG Water using one of the following methods:
(Call, Text or Email)
• Office: 254-822-1343
• Email: ltgwater@yahoo.com
• Operator, Barry Hand: 254-709-8889
LTG Water does not recommend using discolored water to do laundry. If clothing gets stained, immediately wash the clothes again
using a rust remover product. This type of product is available in most grocery stores. For best results, do not let the clothes dry.
Alerts
Flushing the end of the line valves
January 03, 2026
We are flushing the end of the line flush valves today. If you notice cloudy or discolored water please run your outside faucet for 5 to 10 minutes or unclear clear.
FLUSHING YOUR WATER LINE
In Texas, flushing regulations for water distribution systems are governed by both federal and state regulations to ensure the safety and quality of
drinking water. These regulations are outlined by the Texas Commission on Environmental Quality (TCEQ), which oversees public water systems in the
state. The Texas Commission on Environmental Quality (TCEQ) mandates that public water systems (PWSs) inform and educate the public about
certain activities or processes that may affect customers, particularly when these activities have the potential to impact public health or water quality.
Public Notification Requirements
Under TCEQ regulations, PWSs are required to provide public notification in specific circumstances, such as:
• Boil Water Notices: If the water supply is contaminated or its safety is compromised, PWSs must issue a boil water notice to inform
customers to boil water before consumption.
• Violation of Drinking Water Standards: When a PWS violates maximum contaminant levels (MCLs) or treatment techniques, it must notify
customers of the violation, potential health effects, and corrective actions being taken.
• Other Situations: Any other situations that pose a risk to public health, as determined by TCEQ, require timely notification to customers.
These requirements are detailed in TCEQ's publication "Rules and Regulations for Public Water Systems" (RG-195), which outlines the circumstances
under which public notification is mandatory and provides guidance on the content and delivery methods for such notices.
Why flush? Flushing helps to:
• Remove any debris or sediment introduced during the repair.
• Ensure the water is safe for drinking and cooking.
• Prevent water discoloration caused by sediment.
• Remove any air pockets in the pipes.
Follow these simple steps to flush your pipes and relieve trapped air.
Flushing water lines is generally more effective and efficient when done through exterior faucets, particularly the hose bibs, rather than
interior taps. This is because exterior faucets are typically closer to the point where the water enters the home, allowing for a faster and
more thorough flush of the water lines. Run the water for at least 5 minutes or until the water runs clear.
Here's why flushing through exterior faucets is preferred:
• Closer to the main supply: Exterior faucets are usually located closer to the water supply line, meaning less water needs
to be flushed to clear the lines.
• No aerators: Exterior faucets lack aerators, which can get clogged by sediment during flushing.
• No temperature issues: Flushing through exterior faucets, which are typically cold-water taps, avoids potentially getting
sediment into the hot water tank.
• No need to worry about water pressure: Flushing through exterior faucets allows you to open them fully without worrying
about water pressure issues in the house.
While you can still flush interior faucets, it's generally recommended to start with the exterior ones to clear the main lines. You can then
run the interior taps to ensure the water is clear throughout the house.
If discolored water persists after running the water for 15 minutes, please report this to LTG Water using one of the following methods:
(Call, Text or Email)
• Office: 254-822-1343
• Email: ltgwater@yahoo.com
• Operator, Barry Hand: 254-709-8889
LTG Water does not recommend using discolored water to do laundry. If clothing gets stained, immediately wash the clothes again
using a rust remover product. This type of product is available in most grocery stores. For best results, do not let the clothes dry.